EASY DIY CONSOLE TABLE
After looking for a console table on a budget, I realized that I had a lot of left over wood from previous projects. What better way to save some money than to build my own super easy console table! Want to see how I made it? Let's get started! To make this console table you will need: * 1 sheet of plywood *1x4x8 boards (2) * 1x3x8 boards (2) * Hairpin legs x 4. (The legs I purchased came with screws) *Miter saw, drill and nail gun *Power sander and sandpaper *Brad nails and wood glue *Wood stain STEP 1: BASE OF THE TABLE Start off with the base of the table top. You will need plywood and can be any kind as it will be covered. Cut the board to your preferred size. For this particular console table my measurements where 52 1/2 x 13 inches. STEP 2: 1x4 BOARDS Now go ahead and cut your two 1x4 boards to the same width as your table. My table was 13 inches, therefore I cut my boards 13" each, which left me with 15 planks. If you want your console table longer then y...